Top 10 usual forklift mishaps ， forklift procedure should pay attention to these issues ！.

Don't undervalue the forklift at work. If the procedure is not good, there will be severe crashes in mins, and there are many accidents involving forklifts.

Situation 1: The forklift cargo blocked the motorist's view, and the person in front might not be discovered, leading to a rolling mishap.
Situation 2: In order to maintain the balance of the forklift when lifting hefty items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Instance 3: The width of the forklift cargo exceeds the allowable size of the course and holds on the roadside shelf, which almost causes an crash.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not discover the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the motorist is crushed when the forklift surrender.
Situation 7: The forklift chauffeur did not wear a safety belt and fell from the vehicle when it surrendered and was crushed.
Forklift procedure must focus on these matters ：.

Beginning.
1. Before beginning, observe the environments, and after confirming that there are no barriers that impede the safety of driving, beep the horn first and afterwards start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be risk-free prior to starting.
3. When the forklift begins with a load, the vehicle driver must initially verify that the lots is steady and reliable.
4. The begin must be sluggish and steady.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast must be tilted backwards. .
2. Do not raise the fork too high when driving. When going into and leaving the job site or while driving, take care that there will be no challenges overhead. When the load is traveling, the fork has to not be raised too expensive, which will certainly affect the stability of the forklift. .
3. After discharging, the fork needs to be lowered to the typical driving placement prior to driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal should be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will create the lorry to lose lateral stability and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the fire and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are unique conditions.
6. When the forklift is running, it should obey the web traffic rules in the manufacturing facility and need to maintain a particular safety and security range from the automobile in front. .
7. When the forklift is running, the load must be in the lowest position that does not hinder the driving, and the gantry ought to be correctly tilted back. The load shall not be raised except when piling or filling. .
8. The elevation of the lots need to not obstruct the motorist's sight. In special conditions, when the thing influences the forward vision, drive at a reduced rate when reversing.
9. It is restricted to turn on the ramp, nor to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it must drive securely at a reduced speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is forbidden for employees to base on the fork to hold products and play a balancing duty. .
12. If issues are found, they will be fixed and reported in a prompt fashion, and they will never ever run with health problems or hide them.

filling and dumping.
1. When fork-loading things, the range in between the two forks must be readjusted as required to make the lots of both forks balanced and not skewed, and one side of the product need to protest the rack. .
2. It is forbidden to deal with a solitary fork or make use of a fork top or pull. In special conditions, safety and security warning signs must be set up to advise surrounding pedestrians. .
3. In the process of packing and dumping items, the forklift has to be braked with the brake. .
4. The speed of the lorry must be slow-moving and stable. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm people. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as feasible under the load, and it needs to be noted that the fork tip must not touch other goods or objects. The load ought to be supported with very little back tilt of the gantry so that the tons does not move backwards. The mast can be tilted onward a little when the lots is lowered to enable easy positioning of the load and removal of the forks. .
6. It is forbidden to fork products at broadband and ram difficult things with the fork head. .
7. When the forklift is functioning, it is prohibited for Electric Forklift Truck for Warehouse people to loaf the fork, so as to avoid the collapse of the goods and injure individuals. .
8. Overwhelming is forbidden, and it is prohibited to use forks to raise workers to take part in high-altitude procedures to prevent high-altitude falling crashes. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to use forks to choose, transform pallet unload.

Leaving .
1. It is restricted to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you must dump the goods or reduced the fork frame.
2. Draw the Electric Forklift Truck for Warehouse parking brake handle to dead or dispirit the hand brake button.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the motorist does not leave the vehicle's line of sight and does not go beyond 1 min).
4. Remove the trick. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the look should be examined, and fuel, lubing oil and cooling water ought to be included.
2. Inspect the safety efficiency of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and efficient.
4. Throughout the procedure of the forklift, examine whether the pressure and temperature level are typical.
5. After the forklift is running, the exterior leakage ought to also be examined and the seals should be replaced in time.

Forklift Safety Operation Specifications.
1. You need to examine before leaving the car;.
2. When you come across a person in front of you during driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo must be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be too sharp to avoid the tendency of " complimentary turning";.
6. Adding and down the incline needs to be sluggish and uniform, and no turning on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is more than 10%, the car must be driven backwards when worsening;.
8. When the forklift employees bring the goods and move forward, if they run into big or heavy products and go to the driver's line of vision, they need to take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork operation is not enabled.
2. It is not allowed to raise the goods for cross country driving.
3. It is not permitted to get the goods by passing on the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not permitted to utilize inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the list below conditions.
1. Curves, narrow roads, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same size as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844